Rust Encapsulator

Get Rid of the Rust! Stop rust in its tracks with Eastwood’s Rust Encapsulator. Specifically formulated to coat rusty metal, Rust Encapsulator chemically reacts with rust to form a hard, durable coating – halting the further spread of rust! Follow these simple steps to halt further corrosion and rusting with Rust Encapsulator: Remove any loose rust with a wire brush. Clean the area you will be coating until it is grease and oil free (Try Eastwood’s PRE Painting Prep) Paint or spray Rust Encapsulator onto the prepped area. Rust Encapsulator can be thinned 20% with laquer thinner to spray, and also comes in convenient aerosol cans. Allow to dry for 6-8 hours. (You can apply 2 coats if necessary – wait 2-3 hours between coats.) Topcoat is not required, but can be applied after 6-8 hours, if desired. Paint-on Rust Encapsulator comes in pint, quart, and gallon sizes. One quart will double-coat up to 50 feet, while the gallon covers a whopping 200 feet with a double-coat. Aerosol cans are also available for hard-to-reach areas. Available in red, black, clear, silver, and NEW cast gray. Rust Encapsulator looks great even without a topcoat. Eastwood’s Rust Encapsulator is the best on the market – proven to be superior in sunlight resistance, preventing rust creep, and overall durability. Works great for many applications, including automotive, lawn and garden items, lawnmowers, wrought iron fences and decorative items, rusty pipes, steel gutters, snow blowers, and thousands of other household uses. Get Eastwood’s Rust Encapsulator and get rid of the rust!